Motorola Vanguard 305 User Manual Download

Page: 51 / 96

Installation

DSR305 User Guide

System Status

This is a view-only screen that displays information about the status of the
receiver.

Trip Counter. Trip Counter displays the variety of message updates from your
service provider.

Modem Status. Displays a number of messages which describe the current
modem status.

TVPass Card. Located on the front panel, a cover is inserted into this slot for
shipping only and can be easily removed if necessary.

Sleep Timer. See Section 10 page 77.

EAI Output. This feature is used to select the dual satellite feature (SAT A/B)
that requires an external 22 KHz converter box.

The DSR 305 does not require the SAT A/B button to be selected and no user
action is required.

305.book Page 43 Tuesday, April 15, 2003 11:15 AM

Summary of Contents for Vanguard 305

































































































Search results

Summary of Contents for Vanguard 305

Reviews:

Related manuals for Vanguard 305

Brands by name

Popular brands

Motorola Vanguard 305, User Manual

Search results

Summary of Contents for Vanguard 305

Reviews:

Related manuals for Vanguard 305

Brands by name

Popular brands