6809505A6
3
-O
September 26, 2006
23
Level 1 and 2 Service Manual
Disassembly
Removing and Replacing the Flip Assembly Cover
1.
Remove the battery cover, battery, USIM, memory card, rear housing, and transceiver
board assembly as described in the procedures.
2.
Remove the 4 flip assembly screw caps.
3.
Use the T-5 driver to remove the 4 screws from the flip assembly (see Figure 10). Retain
the screws for re-assembly.
4.
Before removing the flip cover, note the locations of the smart buttons on the sides of the
flip assembly.
5.
Use the disassembly tool to gently pry off the flip cover (see Figure 11).
061431o
Figure 10. Removing the Flip Assembly Screws
040722o
Figure 11. Separating the Flip Assembly Cover
S
crew
s
S
crew
s
Flip A
ss
em
b
ly Cover
Di
sass
em
b
ly Tool
