Using the Remote Control Unit
25
ENGLISH
4.
When you see that your dog is feeling the static correction, this is your
dog’s TRAINING LEVEL.
4.5
When to Increase Level of Static Correction
When you are trying to change your dog’s behavior around a heavy distraction
where your dog is too excited to feel the TRAINING LEVEL described above,
you will need to increase the correction level 2 or 3 levels higher than the
TRAINING LEVEL. If the TRAINING LEVEL you established was level
3
, then you
will need to increase it to level
5
to have your dog respond when it is really
distracted or excited. If the TRAINING LEVEL you established was level
5
, then
you will need to increase it to level
7
, so on and so forth.
4.6
Pairing the Pet Collar Unit with the Remote Control
Unit
Your Wireless Fence Pet Training System can pair with up to 2 Pet Collar Units.
The Remote Control Unit and Pet Collar Unit provided are already paired. They
will communicate with each other once they are powered on. You do not need
to pair them again unless the Pet Collar Unit loses its link with the Remote
Control Unit. To pair them again, or pair a new Pet Collar Unit, follow the
procedures below:
1.
Power on both the Remote Control Unit and Pet Collar Unit (see “Powering
On/Off the Remote Control Unit” on page 24 and “Powering On/Off the
Pet Collar Unit” on page 22).
2.
Press the
MENU
KEY
on the Remote Control Unit.
The screen displays a blinking
symbol.
3.
Press and hold the
PAIR KEY
on the Pet Collar Unit to start pairing.
The Power LED flashes in Green on the Pet Collar Unit.
4.
If you have only one Pet Collar Unit, press the
OK
KEY
on the Remote
Control Unit once to confirm.
If you have more than one Pet Collar Unit, press
or
to select a
collar number (1 or 2) and press the
OK
KEY
to confirm.