Using the Pet Collar Unit
23
ENGLISH
3.3
Pairing the Pet Collar Unit with the Remote Control
Unit
Your Wireless Fence Pet Training System can pair with up to 2 Pet Collar Units.
The Remote Control Unit and Pet Collar Unit provided are already paired. They
will communicate with each other once they are powered on. You do not need
to pair them again unless the Pet Collar Unit loses its link with the Remote
Control Unit. To pair them again, or pair a new Pet Collar Unit, follow the
procedures below:
1.
Power on both the Remote Control Unit and Pet Collar Unit (see “Powering
On/Off the Remote Control Unit” on page 24 and “Powering On/Off the
Pet Collar Unit” on page 22).
2.
Press the
MENU
KEY
on the Remote Control Unit.
The screen displays a blinking
symbol.
3.
Press and hold the
PAIR KEY
on the Pet Collar Unit to start pairing.
The Power LED blinks in Green on the Pet Collar Unit.
4.
If you have only one Pet Collar Unit, press the
OK
KEY
on the Remote
Control Unit once to confirm.
If you have more than one Pet Collar Unit, press
or
to select a
collar number (1 or 2) and press the
OK
KEY
to confirm.
NOTE
To test if the units are linked, press and hold the
TONE KEY
on
your
Remote Control Unit. The Pet Collar Unit should emit a beep tone.