Motorola Timeport P8190, Service Manual

Page: 42 / 149

Motorola Confidential Proprietary
TDMA Timeport™ P8190 TDMA Test Mode NAM Programming
30
Table 8: Test Mode NAM Programming Sequence (con’t)
07 000000 Security code. A 6 digit number supplied by the user. This number is used
by the user to access or change “security” features such as the 3-digit unlock
code or the service level.
08 123 Unlock code. A 3 digit number supplied by the user. If the lock feature is
enabled by the user, the phone can be operated only by individuals who
know the unlock code.
09 4
Service level.
This 3 digit number supplied by the user allows various call
placement restrictions if desired. 004 = no restrictions.
10 00000100
(B7-B0)
B OPTION BYTE The display for step 10 represents the status of eight
options, B7 through B0. B7 (msb) is programmed first followed by B6-B0.
Bits enter display on the right and scroll left.
0
Bit not used (Bit B7).
Enter 0.
0
Bit not used (Bit B6).
Enter 0.
0
Bit not used (Bit B5).
Enter 0.
0
Bit not used (Bit B4).
Enter 0.
0
Single System Scan (Bit B3).
If set to 1, phone will scan only one system
based on the setting of the preferred system bit (option bit A6). 1 =
enabled, 0 = disabled.
1 Auto Recall (Bit B2). When set to one, the user may access repertory by a
one or two digit send sequence (speed dialing).
0
Disable Service Levels (Bit B1).
If set to 1, the service level (call
restrictions) cannot be changed by the user.
0
Lock Disable (Bit B0).
When set to 1, the user cannot lock and unlock the
phone unit via the 3 digit lock code.
11 00001000
(C7-C0)
C OPTION BYTE The display for step 11 represents the status of eight
options, C7 through C0. C7 (msb) is programmed first followed by C6-C0.
Bits enter display on the right and scroll left.
0
User Mode NAM Programming Disable (Bit C7).
When set to 1, User
Mode NAM programming cannot be accessed.
0
Second Number Registration (Bit C6).
When set to 1, allows access to
the second phone number.
0 Bit not used (Bit C5). Enter 0.
0
Auto Redial Disable (Bit C4).
When set to 1, the user cannot access the 6-
minute auto redial feature.
1
Speaker Disable (Bit C3).
This bit is used to disable internal handset
speaker when adding V.S.P. option. 1 = handset speaker disabled, 0 =
handset speaker enabled.
0
Bit not used (Bit C2).
Enter 0.
0 Selectable System Scan Disable (Bit C1). When set to 1, the user cannot
select the primary system.
0
Diversity Antenna Enable (Bit C0).
(Extended systems only) 0 = Non-
diversity, 1 = Diversity.
12 0334
Initial Paging System.
There are 4 significant bits for the initial paging
channel. For system A enter 0333 and system B enter 0334.