English
11
ALERTS
Channel Busy Indicator
The red LED will flash twice per second to indicate that the
channel is in use.
Call Tone
Press
^
to transmit your call tone, alerting users on the
same channel and code that you are about to talk. Your radio
has 5 call tones to choose from. Setting the call tone to
0
disables
^
.
To Set the Call Tone
• With the radio on, press
\
until
E
appears in the display.
• Current call tone setting
0
-
5
will begin to flash.
• Press
]
or
[
to change and hear call tones while the
setting number is flashing.
• Press
M
to set new call tone.
Roger Beep (Talk Confirmation Tone)
When you turn on this feature, your two-way radio transmits a
unique tone when you finish transmitting. It’s like saying
'Roger' or 'Over', and lets others know you’ve finished talking.
• To enable or disable the roger beep, press and hold
]
as
you turn your radio on.
• When the roger beep is enabled
!
will show in the display.
• When you release the
M
button you will hear the roger beep.
ACCESSORIES
Belt Clip
Your radio comes with a swivel belt clip.
• To attach, align belt clip post with hole in
the radio back and gently push until it
clicks into place.
• To remove, push release tab on top of
belt clip down to release catch and pull
belt clip from the radio back.
Front Covers
Your radio has a removable front cover
that allows you to customize your radio.
Note: Do not operate your radio without the cover.
To Remove
• With a 1/8 inch flathead screwdriver, push down in between
the top of the front cover and the radio.
• Gently pry the cover away from the radio.
• Pull the top of the removable cover away from the radio.
To Attach
• Reinsert housing tabs at the bottom of the removable cover.
• Press down to snap cover into place.
?????-T54X2 Venus User Guide 20/4/04 2:36 pm Page 11
