background image

16

Symbol STB20XX Cradles

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained 
between a handheld wireless device and a pacemaker to avoid potential interference with the 
pacemaker. These recommendations are consistent with independent research and 
recommendations by Wireless Technology Research.

Persons with Pacemakers

Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when 
turned ON.

Should not carry the device in a breast pocket.

Should use the ear furthest from the pacemaker to minimise the potential for interference.

If you have any reason to suspect that interference is taking place, turn OFF your device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the 
operation of your wireless product may interfere with the medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human exposure to 
electromagnetic fields from radio devices.

EU

To comply with EU RF exposure requirements, antennas that are mounted externally at 
remote locations or operating near users at stand-alone desktop of similar configurations 
must operate with a minimum separation distance of 0 cm from all persons.

For information on “International” human exposure to electromagnet fields refer to the 
Motorola/Symbol Declaration of Conformity (DoC) at http://www2.symbol.com/doc/.

US and Canada

Co-located statement

To comply with FCC RF exposure compliance requirement, the antenna used for this 
transmitter must not be co-located or operating in conjunction with any other 
transmitter/antenna except those already approved in this filling. 

Remote and Standalone Antenna Configurations

To comply with FCC RF exposure requirements, antennas that are mounted externally at 
remote locations or operating near users at stand-alone desktop of similar configurations 
must operate with a minimum separation distance of 0 cm from all persons.

DRAFT

Summary of Contents for Symbol STB20 Series

























Reviews: