background image

Quick Reference Guide

15

Perform tasks at correct heights

Reduce or eliminate vibration

Reduce or eliminate direct pressure

Provide adjustable workstations

Provide adequate clearance

Provide a suitable working environment

Improve work procedures

Alternate hands whenever possible when performing a repetitive task.

Potentially Hazardous Atmospheres - Fixed Installations

You are reminded of the need to observe restrictions on the use of radio devices in fuel 
depots, chemical plants etc. and areas where the air contains chemicals or particles (such as 
grain, dust, or metal powders). 

Vehicle Installation

RF signals may affect improperly installed or inadequately shielded electronic systems in 
motor vehicles (including safety systems). Check with the manufacturer or its representative 
regarding your vehicle. You should also consult the manufacturer of any equipment that has 
been added to your vehicle.

An air bag inflates with great force. DO NOT place objects, including either installed or 
portable wireless equipment, in the area over the air bag or in the air bag deployment area. If 
in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury 
could result. 

Position your device within easy reach. Be able to access your device without removing your 
eyes from the road.

Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless devices.

Potentially Hazardous Atmospheres 

You are reminded of the need to observe restrictions on the use of radio devices in fuel 
depots, chemical plants etc. and areas where the air contains chemicals or particles (such as 
grain, dust, or metal powders).

Wireless devices transmit radio frequency energy and may affect medical electrical 
equipment.

Wireless devices should be switched off wherever you are requested to do so in hospitals, 
clinics or health care facilities. These requests are designed to prevent possible interference 
with sensitive medical equipment.

Wireless devices transmit radio frequency energy and may affect medical electrical 
equipment. When installed adjacent to other equipment, it is advised to verify that the 
adjacent equipment is not adversely affected.

NOTE

Connection to an alert device that will cause a vehicle horn to sound or lights 
to flash, on receipt of a call on public roads, is not permitted.

Safety in Hospitals

DRAFT

Summary of Contents for Symbol STB20 Series

























Reviews: