Motorola SYMBOL DS3578 Product Reference Manual Download

Page: 228 / 430

10 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide

Connecting to an IBM 468X/469X Host

This connection is made directly from the cradle to the host interface.

Figure 10-1

IBM Direct Connection

Connect the modular connector of the IBM 46XX interface cable to the cable interface port on the cradle. See

Connecting the Cradle on page 1-6

Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).

Connect an external power supply.

Ensure all connections are secure.

Pair the digital scanner to the cradle by scanning the bar code on the cradle.

Select the port address by scanning the appropriate bar code from

Port Address on page 10-4

To modify other parameter options, scan the appropriate bar codes in this chapter.

Host Port Connector

Interface cable

NOTE

Interface cables vary depending on configuration. The connectors illustrated in

Figure 10-1

are examples

only. The connectors may be different from those illustrated, but the steps to connect the cradle remain
the same.

NOTE

Disconnect the power supply before changing host cables or the digital scanner may not recognize the
new host.

NOTE

The only required configuration is the port address. Most other digital scanner parameters are typically
controlled by the IBM system.

Summary of Contents for SYMBOL DS3578















































































































































































































































































































































































































































Search results

Summary of Contents for SYMBOL DS3578

Reviews:

Related manuals for SYMBOL DS3578

Brands by name

Popular brands

Motorola SYMBOL DS3578, Product Reference Manual

Search results

Summary of Contents for SYMBOL DS3578

Reviews:

Related manuals for SYMBOL DS3578

Brands by name

Popular brands