Motorola Symbol DS3407 Reference Manual Download Page 362

Page: 362 / 404

B - 6

Symbol DS3407 Product Reference Guide

EAN.UCC
Composites
(GS1 DataBar,
GS1-128,
2D portion of UPC
composite)

Native mode transmission.

Note: UPC portion of composite is transmitted using UPC rules.

Standard data packet.

Data packet containing the data following an encoded symbol separator
character.

Data packet containing the data following an escape mechanism
character. The data packet does not support the ECI protocol.

Data packet containing the data following an escape mechanism
character. The data packet supports the ECI protocol.

GS1-128 emulation

Note: UPC portion of composite is transmitted using UPC rules.

Data packet is a GS1-128 symbol (i.e., data is preceded with ]C1).

PDF417,
Micro PDF417

Reader set to conform to protocol defined in 1994 PDF417 symbology
specifications.

Note:

When this option is transmitted, the receiver

cannot reliably determine whether ECIs have been invoked or whether
data byte 92

DEC

has been doubled in transmission.

Reader set to follow the ECI protocol (Extended Channel
Interpretation). All data characters 92

DEC

are doubled.

Reader set for Basic Channel operation (no escape character
transmission protocol). Data characters 92

DEC

are not doubled.

Note:

When decoders are set to this mode, unbuffered Macro symbols and
symbols requiring the decoder to convey ECI escape sequences
cannot be transmitted.

The bar code contains a GS1-128 symbol, and the first codeword is
903-907, 912, 914, 915.

The bar code contains a GS1-128 symbol, and the first codeword is in
the range 908-909.

The bar code contains a GS1-128 symbol, and the first codeword is in
the range 910-911.

Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is
transmitted as ]L2ABCD.

Table B-3

Modifier Characters (Continued)

Code Type

Option Value

Option

Summary of Contents for Symbol DS3407





















































































































































































































































































































































































































Search results

Summary of Contents for Symbol DS3407

Reviews:

Brands by name

Popular brands

Motorola Symbol DS3407, Reference Manual

Search results

Summary of Contents for Symbol DS3407

Reviews:

Brands by name

Popular brands