Safety and Regulatory Information
B
SVG6x82 Series Wireless Voice Gateway
•
User Guide
ii
590934-001-a
•
Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the device or
use forced air to remove dust.
•
For added protection, unplug the device from the wall outlet and disconnect the cables to avoid damage to this device due to lightning
and power surges.
•
Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the
device is in safe operating condition.
•
Do not open the device. Do not perform any servicing other than that contained in the installation and troubleshooting instructions.
Refer all servicing to qualified service personnel.
•
This device should not be used in an environment that exceeds 104º F (40º C).
SAVE THE ABOVE INSTRUCTIONS
Note to CATV System Installer
— This reminder is provided to call the CATV system installer’s attention to Article 820.93 and 820.100
of the National Electric Code, which provides guidelines for proper grounding and, in particular, specifies that the Coaxial cable shield shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
IMPORTANT VoIP SERVICE INFORMATION
Please contact your Internet Service Provider (ISP) and/or your local municipality for additional information
on making emergency calls using VoIP service in your area.
IMPORTANT
: When using this VoIP device, you CANNOT make any calls, including an emergency call, and
emergency location services (where supported) WILL NOT be available, under the following circumstances:
•
Your broadband ISP connection goes down, is lost, or otherwise fails.
•
You lose electrical power.
•
You have changed the physical address of your VoIP device, and you did not update or otherwise advise
your VoIP service provider of this change.
•
There are delays in making your location information available in or through the local automatic location
information database.
Note
: Your service provider, not Motorola, is responsible for the provision of VoIP telephony services
through this equipment. Motorola shall not be liable for, and expressly disclaims, any direct or indirect
liabilities, damages, losses, claims, demands, actions, causes of action, risks, or harms arising from or
related to the services provided through this equipment.
FCC STATEMENTS
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the device off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
