B
Connecting to the Internet • Before You Begin
SVG2501 Series Wireless Voice Gateway • User Guide
13
550885-001-a
4
Connecting to the Internet
Before You Begin
•
To prevent unauthorized user access, change the default username and password
before proceeding. See
Changing the Default Username and Password
instructions.
•
For security reasons, DO NOT configure your SVG2501 Wireless Voice Gateway over
a wireless network connection.
After installing the gateway, check that your computer can connect to the Internet. For
any problems connecting to the Internet, check the
section for a
possible solution. If there is still no connection, you may have to configure the TCP/IP
settings on the one or more computers connected to the gateway.
Note
: For UNIX or Linux systems, follow the instructions in the applicable user
documentation.
Configuring TCP/IP for Windows XP
1.
Click
Start
and then click
Settings
.
2.
Click
Control Panel
.
3.
Double-click
Network Connections
to list the Dial-up and LAN or High-Speed
Internet connections.
4.
Right-click the network connection for your network interface.
5.
Select
Properties
from the drop-down menu to display the Local Area Connection
Properties window. Be sure Internet Protocol (TCP/IP) is checked.
6.
Select
Internet Protocol (TCP/IP)
and click
Properties
to display the Internet Protocol
(TCP/IP) Properties window.
7.
Select
Obtain an IP address automatically
and
Obtain DNS server address
automatically
.
8.
Click
OK
to save the TCP/IP settings and exit the TCP/IP Properties window.
9.
Close the Local Area Connection Properties window and then exit the Control Panel.
10.
When you complete the TCP/IP configuration, go to
