B
Configuring the Gateway • Changing the Default Username and Password
SVG2501 Series Wireless Voice Gateway • User Guide
18
550885-001-a
Menu Options
Function
Battery
Provides the current status information about the backup battery, if
installed.
Logout
Closes the SVG2501 Configuration Manager.
Changing the Default Username and Password
From the
Status
menu, select
Security
. Complete each field and then click
Apply
to
save your changes.
•
All entries are case-sensitive.
•
For Password Change Username, type a new username.
•
For Current Username Password, type the old password.
•
Make sure
No
is selected for Restore Factory Defaults.
Note
: Do not run
Restore Factory Defaults
to change the Username Password.
Restoring the Default Username and Password
1.
From the
Status menu, select
Security
.
2.
Select
Yes
under Restore Factory Defaults.
3.
Click
Apply
to reset the default username and password.
4.
Log in again using the defaults.
WARNING
: If you run
Restore Factory Defaults
, you will lose additional custom
configuration settings including your Parental Controls, Firewall, and Advanced settings.
