Rear Panel
The rear panel provides cabling connectors, status lights, and power plug.
Item
Description
1
LINK/ACT
When the light is on, the Ethernet connection is available. A blinking light indicates
data is being transferred.
2
This port is the Ethernet connector that transfers data to and from your computer.
3
100
The light is on when a 100Base-T link is established and off when a 10Base-T link
is established.
4
USB
This port provides a direct connection to USB equipped computers.
5
This is the recessed reset button.
6
CABLE
This port transfers data to and from the service provider.
7
POWER
This connector provides power to the SB4100.
Introduction
Before You Begin Installation Operation Basic Configuration Troubleshooting
1
2
3
4
6
5
7
3
SSUURRFFbbooaarrdd
R
TM
