Configuring for TCP/IP
10
Click TCP/IP on the Network window.
If you have more than one TCP/IP
entry, choose the one associated with
the Ethernet card or USB device connected
to the SB4100.
11
Click Properties.
12
Select the IP Address tab on the
TCP/IP window.
13
Click Obtain an IP address automatically.
14
Click OK to accept the TCP/IP settings.
15
Click OK to close the Network window.
16
Click OK when a prompt to restart your
computer is displayed and then click OK
again.
Introduction Before You Begin Installation Operation
Basic Configuration
Troubleshooting
13
SSUURRFFbbooaarrdd
R
TM
