B
Advanced Pages • Advanced Options Page
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide
32
570280-001-a
Field Descriptions for the Advanced Options Page
Field
Description
WAN Blocking
Prevents the SBG941 Configuration Manager or the PCs
behind it from being visible to other computers on the SBG941
WAN.
Select
Enable
to turn on this option.
IPsec PassThrough
Enables the IPsec Pass-Through protocol to be used through
the SBG941 Configuration Manager so that a VPN device (or
software) may communicate properly with the WAN.
Select
Enable
to turn on this option.
PPTP PassThrough
Enables the Point-to-Point Tunneling Protocol (PPTP)
Pass-Through protocol to be used through the SBG941
Configuration Manager so that a VPN device (or software) may
communicate properly with the WAN.
Select
Enable
to turn on this option.
Remote Config Management
Allows remote access to the SBG941 Configuration Manager.
For example, in the browser URL window, type
http://WanIPAddress:8080/
to access the SBG941
Configuration Manager remotely.
Select
Enable
to turn on this option.
Multicast Enable
Allows multicast-specific traffic (denoted by a specific address)
to be passed to and from the PCs on the private network
behind the configuration manager.
Select
Enable
to turn on this option.
UPnP Enable
Turns on the Universal Plug and Play protocol (UPnP) agent in
the configuration manager. If you are running a CPE (client)
application that requires UPnP, select this box.
Select
Enable
to turn on this option.
Rg PassThrough
Disables NAT operation allowing all client computers to act as
passthrough clients.
Select
Enable
to turn on this option.
PassThrough Mac Addresses
Specifies up to 32 computers as passthrough clients not
subject to NAT, using their MAC addresses.
To enable this feature, your cable operator may need to
provide additional public IP addresses.
When done, click
Apply
to save your changes.