Motorola STB4278 User Manual Download Page 209

Page: 209 / 418

Symbologies

13-9

Enable/Disable Bookland EAN

To enable or disable Bookland EAN, scan the appropriate bar code below.

Decode UPC/EAN/JAN Supplementals

Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are
available.

•

Decode UPC/EAN/JAN Only With Supplementals

is selected, UPC/EAN symbols without supplementals are not

decoded.

•

Ignore Supplementals

is selected, and the scanner is presented with a UPC/EAN/JAN with a supplemental, the

UPC/EAN/JAN is decoded and the supplemental bar code is ignored.

•

Autodiscriminate Option

is also available. If this option is selected, choose an appropriate

UPC/EAN/JAN

Supplemental Redundancy

value from the next page. A value of 5 or more is recommended.

•

Select

Enable 378/379 Supplemental Mode

to delay only EAN-13/JAN-13 bar codes starting with a ‘378’ or ‘379’ prefix

by the supplemental search process. All other UPC/EAN/JAN bar codes are exempted from the search and are reported
instantly upon decode.

•

Select

Enable 978 Supplemental Mode

to delay only EAN-13/JAN-13 bar codes starting with a ‘978’ prefix by the

supplemental search process. All other UPC/EAN bar codes are exempted from the search and are reported instantly upon
their decode.

•

Select

Enable Smart Supplemental Mode

to delay only EAN-13/JAN-13 bar codes starting with a ‘378’, ‘379’, or ‘978’

prefix by the supplemental search process. All other UPC/EAN bar codes are exempted from the search and are reported
instantly upon their decode.

To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.

Enable Bookland EAN

Disable Bookland EAN

Summary of Contents for STB4278



































































































































































































































































































































































































































Search results

Summary of Contents for STB4278

Reviews:

Related manuals for STB4278

Brands by name

Popular brands

Motorola STB4278, User Manual

Search results

Summary of Contents for STB4278

Reviews:

Related manuals for STB4278

Brands by name

Popular brands