10
Basic Setup
3.4
Powering the Pet Camera On/Off
To power on the Pet Camera, press and hold the
POWER KEY
for
approximately 3 seconds. The LED lights up in solid green and a melody is
played.
To power off the Pet Camera, press and hold the
POWER KEY
for
approximately 3 seconds until a melody is played. The LED lights up in solid
green before it goes off.
3.5
Behavior of the Status Indicator LED
Note
All LEDs will cease to flash after 10 minutes of continuous flashing in any mode.
LED Behavior
Description
Flashes Blue
Device is connecting to mobile network.
Solid Blue
Device is now connected to mobile network.
Flashes Blue and Green
Device is ready to make a Wi-Fi
®
Direct
connection.
Flashes Green
Device is now connected to Wi-Fi
®
network.
Device is searching for network connection.
Flashes Green (very
slowly)
Device is now idle.
Solid Green
When switching the device ON/OFF.
Solid Red
Device is charging when switched ON.
Solid Orange
Device is charging when switched OFF.
