![Motorola SBV5322 SURFBOARD DIGITAL VOICE MODEM - annexe 1 Installation Manual Download Page 14](http://html.mh-extra.com/html/motorola/sbv5322-surfboard-digital-voice-modem-annexe-1/sbv5322-surfboard-digital-voice-modem-annexe-1_installation-manual_245294014.webp)
5 —
SBV5322 SURFboard Digital Voice Modem
Introduction
Before You Begin
Verify that you have the items pictured below.
You will need 75-ohm coaxial cable with F-type connectors to connect your digital voice
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may need a
1 GHz RF splitter and a total of three coaxial cables to connect both the TV and the digital
voice modem. Coaxial cables and RF splitters are available at consumer electronics stores. To
connect your digital voice modem to an Ethernet hub, see the network description in
“Cabling for Multiple Users” on page 23
. Check the documentation provided with your hub.
Caution
Item
Description
Power adapter
or
or cable
Connects to the AC power outlet
10/100Base-T
Ethernet cable
Connects to the
Ethernet
port
Use Cat 5 or greater cable
Phone wire
Connects the telephone to the cable system to provide
telephone service
Optional Items
The contents of your package may vary depending on the model.
Battery
Provides standby power for your SBV5322. The SBV5322 has
the capability to accommodate two standby batteries. For
additional standby batteries, contact your service provider.
This product is for indoor use only. Do not route the Ethernet or telephone cables
outside of the building. Exposure of the cables to lightning could create a safety
hazard and damage the product.