Motorola SBV5220 User Manual Download

Page: 20 / 64

Introduction

Installation

Troubleshooting

Glossary

License

SBV5220 VoIP Cable Modem User Guide

Check that the lights on the front of the Motorola VoIP cable modem cycle through this sequence:

•

Power flashes during the self-test and changes to solid green when the self-test is successfully complete.

•

Receive flashes while scanning for the receive (

downstream

) channel and changes to solid green when it

is connected.

•

Send flashes while scanning for the send (

upstream

) channel and changes to solid green when it is

connected.

•

Online flashes while the Motorola VoIP cable modem downloads configuration data and changes to solid

green when the download is complete.

Connect your computer to the Motorola VoIP cable modem using USB or Ethernet:

USB: Be sure the SBV5220 VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive.

Perform the

appropriate procedure for

Setting Up a USB Driver

for your Windows version. Connect the USB cable to the

USB port on the Motorola VoIP cable modem. Connect the other end to the USB port on your PC.

Ethernet:

Connect the provided straight-through Ethernet cable to the Ethernet connector on the Motorola VoIP

cable modem. Connect the other end to the Ethernet port on your computer.

Ethernet users do not need to set up

USB.

Computer

Motorola VoIP cable

Either/or

Summary of Contents for SBV5220

































































Search results

Summary of Contents for SBV5220

Reviews:

Related manuals for SBV5220

Brands by name

Popular brands

Motorola SBV5220, User Manual

Search results

Summary of Contents for SBV5220

Reviews:

Related manuals for SBV5220

Brands by name

Popular brands