Motorola RG3000, User Manual

Page: 16 / 46

16
3.
Press SELECT. An options menu is displayed.
4.
Follow the interactive program guide instructions to set up the times to you want start and stop the recording.
User Tip:
The record set up can be accessed from the Pay-Per-View menu so your pay-per-view selection can
be recorded at the time you choose.
When your programming is complete, the following occurs.
• Your VCR begins recording.
• The record LED on the front panel of RG3000 turns on.
Note:
You cannot change channels while the recording is in progress.
C
ANCELLING
Y
OUR
R
ECORDING
If you want to cancel a recording in progress:
1.
Press SELECT on your remote control.
2.
Use the right key to highlight “Cancel.”
3.
Press SELECT. Your recording will be canceled.
P
ROGRAMMING
Y
OUR
VCR C
ODE
(O
PTIONAL
)
Note:
Not all NSPs support VCR codes.
1.
Turn on VCR.
2.
Put a recordable tape into the VCR.
3.
Press Menu on the remote control.
The Main Menu is displayed.
4.
Use the down (directional) key to highlight “Setup VCR.”
5.
Press SELECT.
An options menu is displayed.
6.
If you know your VCR brand and code, highlight “Quick VCR Setup.” See ”TV and VCR Codes” on page 39
for a list of compatible VCRs.
7.
Press SELECT.
An interactive action menu is displayed.
8.
Follow the instructions in the menu.
9.
If you don’t know your VCR code, highlight “Complete VCR Setup.”
10.
Press SELECT.
An interactive action menu is displayed.
11.
Follow the instructions on the menu.