Motorola RG3000, User Manual

Page: 13 / 46

13
3.
Press SELECT.
An options screen is displayed.
4.
Use the down (directional) key to highlight “Change Channel Order.”
5.
Press SELECT.
6.
Follow the instructions in the interactive program guide.
7.
When you have completed your selection, press EXIT to return to the previous screen.
T
O
C
REATE A
F
AVORITE
C
HANNEL
L
IST
1.
Press MENU.
The Main Menu screen of your interactive program guide is displayed.
2.
Use the down (directional) key to highlight “Setup The Channels.”
3.
Press SELECT.
An options screen is displayed.
4.
Use the down (directional) key to highlight “Favorite Channels.”
5.
Press SELECT.
6.
Follow the instructions in the interactive program guide to select your favorite channels.
7.
When you have completed your selection, press EXIT to return to the previous screen.
User Tip:
Selecting channels to be included in the Favorite Channel List can also be performed in Pay-Per-View
and when in the program guide menu.
Now, whenever you access the program guide or press the FAV key on your remote control, the channels will be
listed in the order you selected.
R
EPLACING
R
EMOTE
C
ONTROL
B
ATTERIES
1.
Remove the battery compartment cover by holding the remote control with its back facing you, then pressing
the battery cover at the thumb depression and sliding it off.
2.
Install two 1.5V AA alkaline batteries, aligning positive and negative terminals according to the diagrams in
the battery compartment.
3.
Replace the remote control battery cover, snapping it into place.
4.
Press the Power button on the remote control.
C
ALLER
ID/M
ESSAGE
W
AITING
Note:
The model RG3000C supports Caller ID. The model RG3000V does not support Caller ID.
If you have subscribed to Caller ID, Voice Mail or Call Waiting services with your NSP, these capabilities are
enabled as soon as the RG3000 is connected to the network.
When an incoming call arrives, the message LED on the front of the RG3000 is illuminated and caller ID infor-
mation appears in the upper left-hand corner of each of the TVs that is caller-ID enabled.
The information may include some or all of the following, depending on the services available in your area.