Motorola RG2400, User Manual

Page: 27 / 50

27
V
ERIFYING THE
TV C
ODES
To playback the TV code:
For example, code 130 would show as the following:
<pause> <long blink> <off> (represents 1)
<pause> <long blink> <long blink> <long blink><off> (represents 3)
<pause> <short burst of flickering blinks> <off> (represents 0)
V
ERIFYING AND
S
ETTING
O
THER
F
EATURES
The TV Setup menu allows you read the TV RF settings, as well as set Secondary Audio, Display Language
and the EADS display. These settings are accessed in the TV Setup Menu.
A
CCESSING THE
TV S
ETUP
M
ENU
To access TV Setup Menu:
1.
Press the MENU button on the front panel of the RG2400.
The Gateway Menu is displayed on your TV screen.
2.
Use the down or up key on the RG2400 or the remote to highlight TV Setup.
3.
Press the SELECT button on the RG2400 or the remote control.
SRC-300A SRC-200
1. Press the LED key and hold it down until the LED
flashes rapidly.
2. Press the INFO key. The LED stops blinking at this
point and stays on solid.
3. Press and release the C key. The remote is now in play-
back mode.
4. Observe the LED. The TV code will be indicated by a
blink sequence for each number. See example below.
1. Press the MUTE button and hold it down until the LED
at the top of the remote control flashes rapidly.
2. Press the FAV button. The remote is now in playback
mode.
3. Observe the LED. The TV code will be indicated by a
blink sequence for each number. See example below.
Gateway Menu
SEP 3 3:22 PM
Use and , then press SELECT
Use EXIT to return to program viewing
TV Setup
Remote Control Setup
Exit