Motorola RG2400, User Manual

Page: 12 / 50

12
The following table describes the LEDs on the front of the RG2400. These LEDs operate at the primary viewing
location, which is TV1
Power
■
Exits any active application.
■
Initiates power off sequence (either shows message/time display or power off channel depending on local
settings).
■
Toggles Power LED and the AC outlet (turns both LED and AC outlet on and off).
■
Reboots (restarts) the RG2400 if pressed and held for 5 seconds or more.
Menu Displays the Gateway Menu.
Info Displays information about the currently selected channel.
Guide Displays the program guide.
Channel Up Increases the channel number.
Channel Down Decreases the channel number.
RG2400 LED LED Function
Messages LED A lit LED indicates one or more voice mail messages are present.
When the LED is off, there are no voice messages present.
Power (On) LED Lit when the AC outlet is switched on.
Blinks off and on during the startup process.
Remote LED Briefly lit when a remote control key is pressed (using the remote tuned to the first stream or primary TV). Indicates
that remote keystroke activity is being seen by the settop.
Clock Display
(4-character
display)
■
Under normal operation, this display shows the current time.
■
When the user changes channels, this display will display the channel selected for a few seconds, and then
return to presenting the current time.
■
Hardware Signoff - If the xDSL connection is lost or broken, the two characters on the left display a circling pat-
tern, the two on the right will not be lit.
■
Software Signoff - If the xDSL connection is established but the system is unable to establish software signon,
the two characters on the left display a circling pattern and the two characters on the right also display a similar
circling pattern.
Button Name Button function
Messages
LED
Remote
LED
On LED
Clock
Display