Motorola Solutions RFS7000GR Series RF Switch Secure Installation Guide
38
6.4 Changing Default Wireless Switch Parameters
The various default parameters which must be changed to operate the wireless switch in a secured
operational mode are listed below:
1. Country code must be set to the appropriate country in order to have proper channel of operations.
a. Enter “device self configuration mode”
[G]rfs7000-37FABE(config)#self
[G]rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#
b. Execute the following in device configuration mode.
[G]rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#country-
code us
2. Self Signed certificates should be replaced with a private certificate.
a. The device ships with a default trust point using a default self-signed certificate. This
certificate is associated with the hotspot and onboard RADIUS server. This certificate should
be replaced with a valid certificate from a Certificate Authority.
b. Create a new trust point.
[G]rfs7000-37FABE#crypto pki generate self-signed t generate-
rsa-key S subject-name motoFIPS US CA SJ Motorola WLAN
Successfully generated self-signed certificate
[G]rfs7000-37FABE#commit
c. The following command displays the trust point information.
[G]rfs7000-37FABE#show crypto pki trustpoints
Warning: This will display secure information. Do you want to
proceed? (y/n): y
TRUSTPOINT KEY NAME
VALID UNTIL
t S Sat Jan
28 06:13:41 2023 UTC
default-trustpoint default_rsa_key Sun Dec
11 06:57:20 2022 UTC
CAUTION
Select only the country in which you are using the device. Any other
selection may make the operation of this device illegal.
!
