Regulatory Information
29
Power Supply
Use ONLY a LISTED Motorola, Type no. 86-120786 (54Vdc, 2.7A), direct plug-in power supply, marked Class 2 (IEC60950-1,
SELV).
Use of alternative Power Supply will invalidate any approvals given to this unit and may be dangerous.
Laser Devices - Gigabit Ethernet SFP Option
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
EN60825-1: 2007
IEC60825-1 (Ed. 2.0)
The laser classification is marked on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is
required to comply with US and international regulations:
Wireless Devices - Countries
Country Selection
Select only the country in which you are using the device. Any other selection will make the operation of this device illegal.
Operation in the US and Canada
The use on UNII (Unlicensed National Information Infrastructure) Band 1 5150-5250 MHz is restricted to indoor use only, any
other use will make the operation of this device illegal.
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.
CAUTION
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
.
NOTE
The US only model (RFS-4011-11110-US) has the country code
permanently set to the US. The (RFS-4011-11110-WR) model cannot be
configured for use in the US.
!
RFS4000_Baseline.book Page 29 Tuesday, September 28, 2010 9:55 AM
