Hardware Setup
23
2.
On the configuration computer, configure a terminal emulation application
(such as
HyperTerminal
) as follows:
4.7 Supplying Power to the RFS4011
1.
Plug the power supply (Motorola Part Number: 86-120786-01) into the power inlet at the back of
the RFS4011.
2.
Plug the cord into a standard AC outlet with a voltage range of 100 to 240 VAC.
Terminal Type
VT-100
Port
COM port
Terminal Settings
19200bps transfer rate
8 data bits
no parity
1 stop bit
no flow control
no hardware compression
Power Inlet
RFS4000_Baseline.book Page 23 Tuesday, September 28, 2010 9:55 AM
