Motorola RAZR V3x, Service Manual

Page: 17 / 52

6809497A15-A January 31, 2006 17
Level 1 and 2 Service Manual Tools and Test Equipment
Tools and Test Equipment
Table 1 lists tools and test equipment recommended for disassembly and reassembly
of V3x telephones. Use either the listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola Part Number
1
Description Application
RSX4043-A Torque Driver Used to remove and replace screws.
—
Torque Driver Bit T-3, T-5, T-6 Plus, Apex
440-6IP Torx Plus or equivalent
Used with torque driver.
See Table 7 Rapid Charger
Used to charge battery and to power
phone.
0180386A82
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band) Provides protection from damage to
device caused by electrostatic discharge
(ESD).
0-00-00-30005
Disassembly tool, plastic with flat and
pointed ends (manual opening tool) Used during assembly/disassembly of
phone.
— Tweezers, Plastic
Used during assembly/disassembly of
phone.
— Digital Multimeter, HP34401A
2
Used to measure battery voltage.
8102430Z04 GSM / DCS Test SIM Used to enable manual test mode.
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
1 and 2
V3x
6809497A15-A