41
40
Using Sounds
Using Sounds
You can select the ring and the graphic for incoming call by group.
4. Setting Group Bell
[TOP MENU] ▶ Select Sound ▶ Select Group Bell ▶
Select desired group ▶
Setting Bell/Image ▶
[OK] ▶
Select a desired Bell/Image and ▶
[OK] ▶ Press
[ S T O R E ]
Setting Bell
Select
‘
’and Press
[LIST] ▶
Select Ringer Tone and Press
[ O K ]
Setting Image
Select
‘
’and Press
[OK] ▶
Select Image and Press
[ O K ]
● If graphic is not selected for a phone number, the graphic selected for the group is displayed. If no specific graphic is
selected either for the phone number or the group, the
‘Incoming Call’graphic selected in
‘MainLCD Graphic or Sub
LCD Graphic’in
‘D i s p l a y’is displayed.
● If no ringer is selected by phone number, the ringer selected for the group is applied. If no specific ringer is selected either
for the phone number or the group, the ringer selected in
‘R i n g e r’in
‘S o u n d’is applied.
5. Setting Effect Sound
Power On/Off : You can set the tone muted or sounded when turning the power On or Off. (Off, Sound 1, Sound 2)
If you select
‘O f f’in this field, the initial screen is displayed without sound after the vibration.
Key Pressed : You can enable/disable the key tone. (Off, Doremi, Dew Drop, Synthesizer, Voice(Chinese), Voice(English))
You can adjust the key tone volume with
in the Idle mode. (5 Steps)
Notice Popup : You can enable/disable the tone for the message box(popup menu) as it is displayed on the screen.
The message box tone(popup menu) varies by the situation. (Off, On)
Folder : You can set or clear a tone for opening and closing your folder. (Off, Folder(1~3))
the effect and
[OK] ▶ Press
[STORE]
[TOP MENU] ▶ Select Sound ▶ Select Effect Sound ▶
Select a desired menu and
[OK] ▶
S e t
