Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
39
574702-001 a
This document is uncontrolled pending incorporation in a Motorola CMS
The Purchase Status fields are:
Field
Description
Unsent
The number of purchases in the QIP remaining to be polled. It can be an
integer from 0 to 63.
Unack
The number of reports that have not been acknowledged by the controller. It is
an integer.
Last Seq Num
The last acknowledged sequence number of a purchase sent by the controller.
It is a 16-bit, unsigned hexadecimal number.
Last RB Time
The last time the QIP7000 series attempted to report back purchases to the
controller, in GPS seconds.
IPPV Status
If IPPV is enabled, the IPPV status indicator is on. If IPPV is disabled, the IPPV
status indicator is off.
Prep CMD
“Last Prepare for Poll Command” sequence number and time of the last
prepare for poll request command that was sent by the controller. Note that
each requesting process maintains an independent sequence of poll requests
to uniquely identify the poll responses.
Prep ACK
“Last Prepare for Poll Acknowledge” sequence number and time of the last
Report Purchase request sent by the controller.
Poll Request
Sequence number and time of the last send poll buffer command that was
sent by the controller.
Poll Acknowledge
Sequence number and time of the last Poll Acknowledge message sent by the
controller.
Stack Unit
Unit used in purchase processing.
Show Count
Count used in purchase processing.
Credit Total
Credit used for purchase processing.
Debit Total
Debit used for purchase processing.
