manualshive.com logo in svg

Motorola PTP 54500, User Manual

The Motorola PTP 54500 is a top-notch wireless communication device designed for seamless connectivity. Unlock its full potential by using our comprehensive User Manual, available for free download at manualshive.com. This manual guarantees a hassle-free user experience, ensuring you make the most out of your Motorola PTP 54500.

Share
Download
background image

 

 

16 Legal and Regulatory Notices 

 

212

acknowledgment in the product documentation would be appreciated but is not 

required. 

o

  Altered source versions must be plainly marked as such, and must not be 

misrepresented as being the original software. 

o

  The name of the author may not be used to endorse or promote products derived 

from this software without specific prior written permission.

 

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS 

OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE 

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 

OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGE. 

3.  zlib.h – Interface of the 'zlib' general purpose compression library version 1.2.3, July 

18th, 2005. Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler. This software is 

provided 'as-is', without any express or implied warranty.  In no event will the authors be 

held liable for any damages arising from the use of this software. Permission is granted 

to anyone to use this software for any purpose, including commercial applications, and 

to alter it and redistribute it  freely, subject to the following restrictions: 

o

  The origin of this software must not be misrepresented; you must not claim that 

you wrote the original software. If you use this software in a product, an 

acknowledgment in the product documentation would be appreciated but is not 

required. 

o

  Altered source versions must be plainly marked as such, and must not be 

misrepresented as being the original software. 

o

  This notice may not be removed or altered from any source distribution. 

  Jean-loup Gailly [email protected] 

  Mark Adler [email protected] 

Summary of Contents for PTP 54500





































































































































































































































Reviews:

No comments

Related manuals for PTP 54500

GE D20MX User Manual preview
D20MX
Brand: GE Pages: 146
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
NEC N8104-128 Installation Manual preview
N8104-128
Brand: NEC Pages: 47
Pakedge Device & Software X-Series Quick Start Manual preview
X-Series
Brand: Pakedge Device & Software Pages: 20
Patton electronics SMARTNODE 4900 Getting Started Manual preview
SMARTNODE 4900
Brand: Patton electronics Pages: 75
Patton electronics RocketLink-G 3088/I Getting Started Manual preview
RocketLink-G 3088/I
Brand: Patton electronics Pages: 61
Patton SmartNode 5200 Quick Start Manual preview
SmartNode 5200
Brand: Patton Pages: 12
Patton SL4020 Getting Started Manual preview
SL4020
Brand: Patton Pages: 84
Patton OnSite 3210 Series User Manual preview
OnSite 3210 Series
Brand: Patton Pages: 110
Patton electronics 4900 Series Specification Sheet preview
4900 Series
Brand: Patton electronics Pages: 2
Patton electronics SMARTNODE 4110 Series User Manual preview
SMARTNODE 4110 Series
Brand: Patton electronics Pages: 78
Patton electronics SMARTNODE 4552 Quick Start Manual preview
SMARTNODE 4552
Brand: Patton electronics Pages: 8
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
VMIC VMICPCI-7755 Product Manual preview
VMICPCI-7755
Brand: VMIC Pages: 126
AXIOMTEK tBOX330-870-FL Series Quick Installation Manual preview
tBOX330-870-FL Series
Brand: AXIOMTEK Pages: 2
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Brand: Funkwerk Pages: 2
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
Paradyne Comsphere 3510 User Manual preview
Comsphere 3510
Brand: Paradyne Pages: 85

Brands by name

Popular brands

Load more brands