Motorola Professional CDM1550 LS+ User Manual Download

Page: 28 / 114

English

TTING S

ARTE

SELECTING A TRUNKED ZONE
AND TALKGROUP

Up to 15 PassPort and/or LTR trunked zones
(containing 16 talkgroups each) can be
programmed into your radio.

To select a trunked zone and talkgroup:

SENDING A TRUNKED CALL

To Send a Trunked Call

to select the appropriate

trunked zone.

until you see the desired

preprogrammed talkgroup on the display.

Note:

(the PassPort Zone symbol)

appears when a PassPort Zone has
been selected.

Hold the microphone in a vertical position
at a distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.

Press and hold the PTT button.
–or–
Press and release the PTT button and
wait 3 seconds.

•

If access to the trunked system was
successful, the red LED indicator
lights steady.

In addition, your dealer can
program your radio to sound a
short, high-pitched (talk permit)
tone, indicating successful trunked
system access.

•

If access to the trunked system was
unsuccessful, the red LED indicator
flashes and a low-pitched (talk
prohibit) tone sounds, indicating that
the system was busy or out-of-range.

Summary of Contents for Professional CDM1550 LS+



















































































































Search results

Summary of Contents for Professional CDM1550 LS+

Reviews:

Related manuals for Professional CDM1550 LS+

Brands by name

Popular brands

Motorola Professional CDM1550 LS+, User Manual

Search results

Summary of Contents for Professional CDM1550 LS+

Reviews:

Related manuals for Professional CDM1550 LS+

Brands by name

Popular brands