Motorola Professional CDM1550 LS+, User Manual

Page: 80 / 114

80
English
PH
ON
E
MAKING A PHONE CALL
D
THROUGH A CONVENTIONAL
SYSTEM
To Initiate a Phone Call
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
D
appears on the display when you are
in Phone mode.
5 Press and Release the PTT button.
• If phone access is successful, a dial
tone sounds.
• If phone access is unsuccessful, a
low-pitched alternating tone sounds.
Disconnect the call (see step 8) and
try again.
6 Enter the phone number with the DTMF
microphone. The number is automatically
sent without pressing the PTT button
again.
–or–
y
or
z
to
select a number
from the phone list.
Press and release the PTT button again
to send the number.
;;;
-
;;;
-
;;;;
7 Hold the radio in a vertical position with
the microphone 1 to 2 inches (2.5 to
5 cm) away from your mouth. Press the
PTT button to talk; release it to listen.
8 To disconnect the phone call:
Press and hold
(
to exit Phone.
D
no longer appears on the display.
1 Select a conventional zone and channel
that have been programmed for
telephone.