Status
LED Status
Comments
Standby
Flashing am-
ber
• Battery is waiting to rapid
charge.
• Battery may be too hot, too
cold, or low voltage.
• Charger may be too hot.
End of Service
Life
Alternating red
and green
Battery remains usable but may
be nearing the end of its rated
service life.
Recalibration
Required
Alternating
amber and
green
Battery requires calibration or
battery is due for calibration.
3.3
Installing the Cradle
Procedure:
1
Attach the RAM base to the cradle by tightening the four screws.
2
With the cradle attached to the RAM base, tighten the RAM mount with two screws onto the
vehicle bracket.
Figure 2: Cradle Installation
1
2
Label
Description
1
Arm, accessory kit, RAM mount (HW003366A01)
2
Travel Charger/Vehicular Cradle (PS000498A01)
MN008301A01-AB
Chapter 3 : Operating Instruction
14