Motorola PMLN7094, User Manual

Page: 8 / 228

6
Englis
h
CHARGING PROCEDURE
1. Plug the charger end of the power supply into the micro USB slot
located at the bottom of the charger.
2. Plug the wall receptacle end of the power supply into appropriate AC
outlet. A successful power-up sequence is indicated by a
SINGLE
FLASH GREEN on the charger indicator.
3. To charge a radio with battery with the radio turned off, see Figure 2
and Figure 3.
a. Slide the radio into the charger pocket and align it to the groove on
each side of the radio with the corresponding raised rail on each
side of the charger pocket.
b. Ensure complete contact between the charger and radio contacts.
c. See radio indication display for charging status.
d. To remove a radio from the charger, use two hands to remove the
radio from the charger pocket. One hand to hold and support the
charger, and the other hand to remove the radio.
Figure 2: Slotting the radio into the charger for charging