Phone Programming
29
Pause Digit Entry
When storing a number, you can program your phone so that it will not only dial
a number, but also pause and enter another series of numbers such as a Personal
Identification Number (PIN) or password. This feature is particularly useful for
automated services such as voice mail and banking systems.
Example: Let’s say you have a company voice mail account that you frequently
check while traveling. And, to access that account you must do the following:
•
Dial your work number
•
Press
#
while the voice mail greeting is being played
•
Enter your PIN to access your messages
You can program your i2000plus phone to enter all of the above information for
you by separating each entry with a pause. The stored data would look like this:
17035551234P#P1234. The first eleven digits represent the number that must be
dialed to access your voice mail. The P represents a 3 second pause. The #
interrupts your greeting. The second P represents another 3 second pause. The
last four digits represent your PIN.
To create a three-second pause follow the steps below.
NOTE: You can enter up to 20 numbers/characters in a single entry,
stored or dialed.
You can program your phone to pause for more than 3
seconds. For example, performing the above step twice will
program two pauses and cause your phone to wait 6 seconds
before entering the next set of numbers.
7
Enter PrvtID displays. Enter the Direct Connect Private ID. Press
o
under “Store.” If you do not wish to store a Private ID, press
o
under
“Skip.” Press
o
under OK.
8
Repeat steps 5 through 7 to add additional names/numbers.
9
Press
o
under “Exit” when you have finished.
Press and hold
*
for two seconds. The pause symbol (P) will appear
on the display screen.
Summary of Contents for Nextel iDEN i2000plus
Page 1: ...Nextel iDEN Digital Internet ready Multi Service Phone i2000plus Phone User s Guide 070102 ...
Page 2: ......
Page 10: ...6 nextel com ...
Page 142: ......
