Administrator’s Handbook
78
System commands
set system name
name
Specifies the name of your Motorola Netopia® Gateway. Each Motorola Netopia® Gateway is assigned a name
as part of its factory initialization. The default name for a Motorola Netopia® Gateway consists of the word “Neto-
pia-7000/XXX” where “XXX” is the serial number of the device; for example, Netopia-7000/9437188. A system
name can be 1 – 255 characters long. Once you have assigned a name to your Motorola Netopia® Gateway, you
can enter that name in the Address
text field of your browser to open a connection to your Motorola Netopia®
Gateway.
☛
NOTE:
Some broadband cable-oriented Service Providers use the
System Name
as an important identifi-
cation and support parameter. If your Gateway is part of this type of network, do
NOT
alter the Sys-
tem Name unless specifically instructed by your Service Provider.
set system time-zone [ UTC | HST10 | AKST9AKDT | YST8 | PST8PDT |
MST7MDT | MST7 | CST6CDT | CST6 | EST5EDT | AST4ADT | NST3:30NDT ]
time-zone
of 0 is Coordinated Universal Time (UTC); options are -12 through 12 (+/- 1 hour increments from UTC
time).
set system auto-daylight-savings [ on | off ]
Time zones honoring Daylight Saving Time may be automatically designated.
set system firewall-log enable [ on | off ]
Turns firewall logging on or off. The firewall log tracks attempted violations of the firewall rules. Default is
on
.
set system firewall-log file-size [ 4096... 65536 ]
Specifies a size for the firewall logs. The most recent entries are posted to the beginning of the log. When the log
becomes full, the oldest entries are dropped. The default is 16384.
set system firewall-log file-count [ 2... 8 ]
Specifies the number of possible log files. The default is 4.
set system log buffer-size [ 4096... 65536 ]
Specifies a size for the system log. The most recent entries are posted to the beginning of the log. When the log
becomes full, the oldest entries are dropped. The default is 16384.
set system log level [ low | medium | high | alerts | failures ]
Specifies the types of log messages you want the Motorola Netopia® Gateway to record. All messages with a
level equal to or greater than the level you specify are recorded. For example, if you specify set system diagnos-
tic-level
medium
, the diagnostic log will retain medium-level informational messages, alerts, and failure mes-
sages.
Use the following guidelines:
◆
low
- Low-level informational messages or greater; includes trivial status messages.
Summary of Contents for Netopia
