Motorola Netopia Administrator'S Handbook Download Page 35

Page: 35 / 108

Status

When you click

Status

in the left hand column of links, the links bar expands.

Available Status links vary by platform.

DSL

When you click

DSL

, the DSL Statistics page appears.

The DSL Statistics page displays information about the Gateway's WAN connection to the Internet.

◆

Line State:

May be Up (connected) or Down (disconnected).

◆

Modulation:

Method of regulating the DSL signal. DMT (Discrete MultiTone) allows connections to work better

when certain radio transmitters are present.

◆

Data Path:

Type of path used by the device's processor.

Downstream and Upstream statistics

◆

Max Allowed Speed (kbps):

Your maximum speeds for downloading (receiving) and uploading (sending) data

on the DSL line, in kilobits per second.

◆

SN Margin (db):

Signal to noise margin, in decibels. Reflects the amount of unwanted “noise” on the DSL line.

◆

Line Attenuation:

Amount of reduction in signal strength on the DSL line, in decibels.

◆

CRC Errors:

Number of times data packets have had to be resent due to errors in transmission or reception.

WAN

When you click

WAN

, the WAN Statistics page appears.

The WAN Statistics page:

◆

displays detailed statistics about your WAN data traffic, upstream and downstream.

◆

displays the Server MAC address for the PPPoE session (if applicable)

This information is useful for troubleshooting and when seeking technical support.

Summary of Contents for Netopia













































































































Search results

Summary of Contents for Netopia

Reviews:

Related manuals for Netopia

Brands by name

Popular brands

Motorola Netopia, Administrator'S Handbook

Search results

Summary of Contents for Netopia

Reviews:

Related manuals for Netopia

Brands by name

Popular brands