B - 2 6 D i a g n o s t i c s
DCT 2000 Installation Manual
LAST POLL ACK:
170
6-15-2001
20:49:33
Table B-22 lists the STARVUE II transmitter status:
Table B-22
STARVUE II transmitter status
LED and
OSD
Indicator
-
Idle
t
Transmitting
The
FREQUENCY
field indicates the transmitting frequency.
The
LEVEL
field indicates the approximate power value of the STARVUE II transmitter in
dBmV. The difference between the power value on the diagnostic screen and the actual power of
the STARVUE II module may be
±
5 dBmV.
Table B-23 shows how the LED and OSD indicate the IPPV status:
Table B-23
STARVUE II IPPV status
LED OSD Mode
on
ENABLED IPPV
enabled
flashing
UNSENT
−
##
The DCT2000 contains unsent IPPV
transactions
off
DISABLED IPPV
disabled
The variable
−
##
is the number of unsent transactions.
The
LAST POLL REQ
field contains the sequence number of the last poll request received by the
DCT2000. The time stamp of the last poll request will be displayed immediately below
LAST
POLL REQ
. If no poll request has been received by the DCT2000, the sequence number field will
display N/A and the time stamp field will display N/A. If a poll request has been received by the
DCT2000 but the system time of the DCT2000 has not yet been initialized, the time stamp field
will display NOT AVAILABLE.
The
LAST POLL ACK
field contains the sequence number of the last poll acknowledge received by
the DCT2000. The time stamp of the last poll acknowledge will be displayed immediately below
LAST POLL ACK
. If no poll acknowledge has been received by the DCT2000, the sequence number
field will display N/A and the time stamp field will display N/A. If a poll acknowledge has been
received by the DCT2000 but the system time of the DCT2000 has not yet been initialized, the
time stamp field will display NOT AVAILABLE.
Summary of Contents for Mts-2000
Page 86: ...484288 001 12 01 MGBI ...
