Motorola MTP8500Ex, User Manual

Page: 80 / 352

4.3.11
Additional Address
The Additional Address feature allows the radio to send RMS messages, and Local Information
Protocol (LIP) reports to additionally defined recipients.
The default addresses where the radio sends RMS messages and LIP reports are defined by your
service provider. If an Additional Address is selected and enabled, RMS messages and LIP reports are
also sent to the recipient defined in the Additional Address.
You can create, edit, and delete Additional Addresses using the radio menu. If an Additional Address is
configured by your service provider, the service provider can disable edition and deletion of the
address using the radio menu.
You can define up to 30 Additional Addresses.
4.3.11.1
Enabling or Disabling Additional Address
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages
→
Additional Address
→
Enable.
3 Select one of the following:
• On – to activate the feature
• Off – to deactivate the feature
4.3.11.2
Selecting Additional Address
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages
→
Additional Address
→
Select Address.
Select Address display appears with an available list of aliases.
3 Scroll through the list to highlight your alias and press Select.
4.3.11.3
Viewing Additional Address
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages
→
Additional Address
→
Select Address.
3 Scroll to select the alias of the Additional Address you wish view.
4 Press the Menu key.
5 Select one of the following:
• Edit (for User Defined Additional Address alias)
• View (for Pre-defined Additional Address alias)
The display shows the Alias, the ISSI/ITSI/GSSI and the Status of the address (Pre-Defined or User
Definded).
MN002033A01–AC (en-US)
Chapter 4: Main Menu
80 Send Feedback