12
- If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the
button
repeatedly on the unit or the
BT
button on
the remote control to select Bluetooth mode.
“
NO BT
” will show on the display if the unit
is not paired to any Bluetooth device.
2 Activate your Bluetooth device and select
the search mode. “
MT160DSB
” will appear
on your Bluetooth device list.
- If you cannot find the unit, press and hold
the
BT
button on the remote control to be
searchable. The display will show “
PAIR
” and
you will hear "
Pairing
" from the unit.
3 Select “
MT160DSB
” in the pairing list. After
successful pairing, you will hear
"Paired
"
from the unit, and the display panel shows
“
BT
”.
4 Play music from the connected Bluetooth
device.
To disconnect the Bluetooth function:
- Switch to another function on the unit.
- Disable the function from your Bluetooth
d e v i c e .T h e B l u e t o o t h d e v i c e w i l l b e
d i s co n n e c te d f ro m t h e u n i t a f te r t h e
“
Disconnected
” voice prompt.
- Press and hold the
BT
button on the remote
control.
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
• The player will also be disconnected when
your device is moved beyond the operational
range.
• If you want to reconnect your device to this
player, place it within the operational range.
• I f t h e d e v i c e i s m o v e d b e y o n d t h e
operational range, when it is brought back,
please check if the device is still connected
to the player.
• I f t h e c o n n e c t i o n i s l o s t , f o l l o w t h e
instructions above to pair your device to the
player again.
Listen to Music from Bluetooth
Device
- If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
- If the device also supports Audio Video
Remote Control Profile (AVRCP), you can
use the player's remote control to play music
stored on the device.
1 Pair your device with the player.
2 Play music via your device (if it supports
A2DP).
3 Use supplied remote control to control play
(if it supports AVRCP).
Start, pause or resume play
/
Skip to the previous or next track
USB Operation
1 Insert the USB device.
2 Press the
button repeatedly on the unit
or press the
SOURCE
button on the remote
control to select
USB
mode.
3 During playback:
Start, pause or resume play
/
Skip to the previous or next track
Tips:
• The unit can support USB devices with up to
32 GB of memory.
• This unit can play MP3.
• The unit support FAT32.