10
Connect Power
Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.
- Before connecting the AC power cord,
e n s u re yo u h ave co m p l e te d a l l o t h e r
connections.
Subwoofer
• Connect the mains cable to the
AC~
Socket
of the subwoofer and then into a mains
socket.
Soundbar
• Connect the mains cable to the
AC~
Socket
of main unit and then into a mains socket.
Pair up with the subwoofer
Automatic pairing
Plug the soundbar and the subwoofer into the
mains sockets and then press
on the unit or
remote control to switch the unit to ON mode.
The subwoofer and soundbar will automatically
pair.
• When the subwoofer is pairing with the main
unit, the Pair Indicator will flash fast.
• When the subwoofer is paired with the main
unit, the Pair Indicator will light up.
NOTE:
- D o n o t p re s s t h e
P a i r
b u t t o n o n t h e
subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the
subwoofer with the main unit manually.
Manual pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1 Unplug both units from the mains sockets
again, then plug them in again after 3
minutes.
- Press and hold the
PAIR
button on the
subwoofer for a few seconds.
- The Pair indicator on the subwoofer will
rapidly blink.
2 Then press the
on the unit or remote
control to switch the unit
ON
.
3 Light stops blinking once the Subwoofer is
paired with the Soundbar.
56:/)'2
.*3/'
8)
.*3/'8)
.KGJVNUTK
2/4+/4
4 If the Pair indicator still keeps blinking,
repeat step 1-3.
NOTE:
• The subwoofer should be within 6m of the
soundbar in an open area (the closer the
better).
• Remove any objects between the subwoofer
and the soundbar.
• If the wireless connection fails again, check
if there is a conflict or strong interference
(e. g. interference from an electronic device)
around the location. Remove these conflicts
or strong interferences and repeat the above
procedures.
• If the main unit is not connected with the
subwoofer and it is in ON mode, the unit’s
POWER indicator will flash.
Basic Operation
Standby/ON
When you first connect the main unit to the
mains socket, the main unit will be in Standby
mode.
• Press the
button on the unit or on the
remote control to switch the unit ON.
• Press the
button again to switch the unit
back to STANDBY mode.
