Let’s get started
First connect the MR1700
’s yellow Ethernet cable between the
MR1700
’s WAN port and the Ethernet port of a cable modem, DSL
modem, fiber optic modem, or an in-building network used for Internet
access.
If you are using a modem, turn it off now. For some modems, this
requires you to remove the power backup battery. After the modem is
off for at least 10 seconds, turn it back on. (If it has a backup battery,
replace that first.)
Power up your MR1700
Connect the supplied power cube between
the MR1700
’s
power jack
and a working electrical outlet.
Most users will plug the MR1700 into their cable or DSL modem and
use the MR1700
’s default settings. In the unlikely event that you are
using a static IP address or want to terminate a PPPoE connection,
see the full-length User Manual at
www.motorolanetwork.com/MR1700manual
for further assistance.
If you do not know that you need these settings, then most likely you
do not.
