Motorola MOTOwi4 Canopy 30, User Manual, Page: 52 / 162

Issue 3.1, July 2006 Page 52 of 162
Figure 25: Status Page
The two 30/60 Mbps Backhaul units are arranged in a master and slave relationship. The units’
role in this relationship is displayed in the page title. The master unit will always have the title ‘-
Master’, and the slave will always have the ‘- Slave’ appended to the ‘Systems Status’ page
title.
The following Section details all the attributes displayed on the status page .
Link Name The link name is allocated by the system administrator and is used to identify the
equipment on the network. The link name attribute is to a maximum size of 63 ASCII
characters.
Link Location The link location is allocated by the system administrator and can be used as a
generic scratch pad to describe the location of the equipment or any other equipment related
notes. The link location attribute is limited to a maximum size of 63 ASCII characters.
Software Version The attribute describes the version of software installed on the equipment.
The format of the attributes is FFPP - XX - YY where FF is the frequency variant (5.7 or 5.4 GHz),
PP is the product variant, XX is the major release version and YY is the minor release version.
Hardware Version The hardware version attribute contains all the combined hardware version
information. The attribute is formatted as D X. -R YY - Z where D XX contain the version of the
digital card, R YY contains the version of the RF (radio frequency) card and Z describes the
antenna type which can be I (Integrated) or C (connectorized).
Region Code The region code is used by the system to constrain the wireless to operate within
the regulatory regime of the particular country. The region code is encoded in the product
license key. If the operator wishes to change region code, a new license key must be obtained
from Motorola or the local distributor / system integrator.
Elapsed Time Indicator The elapsed time indicator attribute presents the total time in years,
days, hours, minutes and seconds since the last system restart. The system can restart for
several reasons, e.g. commanded reboot from the system reboot webpage, or a power cycle of
the equipment.
Ethernet Link Status Current status of the Ethernet link. A state of ‘Up’ with a green
background indicates that an Ethernet link is established. A state of ‘Down’ with a red
background indicates that the Ethernet link is not established.
Ethernet Speed The negotiated speed of the Ethernet interface specified in Mbps.