6809506A96-O
March 13, 2007
37
Level 1 and 2 Service Manual
Disassembly
4.
Rotate the slider inner assembly upward, to expose the keypad flex connector
which is still attached to the slider outer assembly.
5.
Use the disassembly tool to unseat the keypad flex connector. Ensure the
electrical components around the connector are not damaged.
6.
Remove the slider front housing from the slider "mag" assembly.
7.
To replace, align the slider front housing to the slider "mag" assembly.
8.
Insert the keypad end of the slider front housing to the slider mag assembly.
9.
Connect the keypad flex connector to the slider "mag" assembly.
10. Lower the top end of the slider inner assembly onto the slider "mag" assembly.
11. Insert and tighten the 2 T5 slider assembly screws. Tighten screws to 1.1 +/-
0.1 in-lbf. Do not overtighten.
12. Replace the front housing, transceiver board assembly, daughter board
assembly, rear housing, SIM, battery, and battery as described in the
procedures.
061771a
Figure 26. Removing the Keypad Flex Connector
S
lider
“m
a
g”
ass
em
b
ly
Keyp
a
d flex
connector
Summary of Contents for MOTORIZR Z6
Page 46: ...46 March 13 2007 6809506A96 O Troubleshooting Z6 Troubleshooting ...
Page 55: ......
Page 56: ......
