Motorola MOTOMING A1600, User Manual

Page: 45 / 116

43 calls
To switch between calls, tap Switch .
To connect the two calls, tap Link .
caller ID
Calling line identification (caller ID) shows the
phone number for an incoming call in your
phone’s display.
Your phone shows the caller’s name and picture when
they’re stored in your phonebook, or
Incoming Call when
caller ID information isn’t available.
You can set your phone to play a different ringer ID
for an entry stored in your phonebook (see page 69).
To show or hide your phone number from the next
person you call:
1 Tap
Ú
in the global navigation bar to open the
phone keypad.
2 Tap
é
, then tap
u
Setup to open the phone
setup menu.
3 Tap Show ID then tap On or Off to show or hide your
caller ID for outgoing calls.
4 Tap Save to save your settings.
5 Tap
ó
to exit the phone setup menu.
Tip: Select Network Controlled to let the network determine
your caller ID status.
cancel incoming call
While the phone is ringing or vibrating, tap Ignore
to cancel the incoming call.
Depending on your phone settings and/or service
subscription, the call may be forwarded to another
number, or the caller may hear a busy signal.
To explicitly transmit a busy signal to the caller, tap
Busy . This may divert the call to your voicemail inbox,
depending on your service subscription.