Motorola MOTOMESH Duo 4300-49, User Manual

Page: 53 / 90

May 2008
4-1
Chapter
4
Chapter 4: Accessing the Web
Interface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
This chapter includes information about how to:
- Access a device’s backdoor (or initial access) using its Web Interface
- Access the web interface through other means
Starting the Web Interface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
By default, all MOTOMESH Duo devices are configured as Intelligent Access Points (IAPs). Before
initializing the Web Interface, apply power to the network device to be configured. Use the standard
Windows Network Connections dialogs to configure the IP Address for the device to the Web
Interface.
Using an Ethernet cable or wireless card, use a Web browser to navigate to the Web Interface. Access
to the Web Interface requires a Username and Password. The default Username is
Admin and default
Password is 5up . See the section below for device access details.
Initial or Backdoor Access to the 4300-xx Device and its Web
Interface
The following procedure allows backdoor access to a 4300-xx device after it has been deployed and
for an unexplained reason there is a problem accessing it via WMS or the Web Interface.
•
The Duo 2.1 4300-xx default IP address is 192.168.1.1
•
The DUO backdoor can only be accessed by a client card across the 2.4 GHz wireless radio
Procedure 4-1 Initial or Backdoor Access to the 4300-xx Device and its Web Interface
1. Configure a wireless client adapter with a static IP address as indicated below.