Motorola MOTOMESH Duo 4300-49, User Manual

Page: 31 / 90

MOTOMESH DUO 2.1 4300 Users Guide
May 2008
2-9
External Personality Plug Usage Information
Procedure 2-2 Personality Plug Usage Information
Reset Plug Usage Information
An optional Red Hardware Reset Plug (looks like a red personality plug, not shown above) is used to
reset a 4300-xx device back to its factory default configuration. See procedure below.
Additional Personality and Reset Plug Information
The following table contains function and usage information for the available Personality and Reset
Plugs in relation to MOTOMESH Duo 1.1 and MOTOMESH Duo 2.0 hardware.
Table 2-4 Personality and Reset Plug Information in Relation to Hardware
Personality
Plug Type Plug
Color
Part # Function Usage
If used
with
1.1
hardware
If used
with
2.0
hardware
Canopy
Connect PoE
Adapter
Black RLN6342A
Enables
MOTOMESH /
DUO IAP's to
send voltage
(24
Volts DC
) across
the PoE Ethernet
connection to
power a co-
located Canopy
PoE device.
Screw the plug
firmly onto the
connector labeled
“Select” on any
MOTOMESH 1.1 or
Duo 2.0 IAP. Plug
must stay
permanently
connected to
function.
Function
Enabled Function
Enabled
Standard PoE
Adapter
Grey RLN6343A
Enables
MOTOMESH 1.1
only devices to
send standard
IEEE 802.3af
PoE voltage
(48
Volts DC)
across
the PoE Ethernet
connection to a
standard PoE
enabled device.
Screw the plug
firmly onto the
connector labeled
“Select” on
MOTOMESH 1.1
(IAP/MWR) devices
only. Plug must
stay permanently
connected to
function.
Function
Enabled
No effect
1 Connect an external PoE device to the POE OPT port on the 4300 unit with the Ethernet cable provided.
2 Connect the Canopy Connect or Standards based 802.3 af PoE Personality Plug to the Personality Port
(shown above) AFTER the Ethernet cable has been connected to the desired external device.