manualshive.com logo in svg

Motorola MOTOMESH DUO 2.0 4300, User Manual, Page: 22 / 74

Share
Download
Motorola MOTOMESH DUO 2.0 4300 User Manual Download Page 22

Chapter 2: Infrastructure Device Installation 

July 2007 

2-2 

DO NOT

 use the Web Interface to manage VAP, VLAN, or Security 

configurations. 

2.

 

If a device has already been added to the network using MeshManager, 

DO NOT

 

use the Web Interface to change the device type from an IAP to an MWR or from 
an MWR to an IAP. 

3.

 

If you use the Web Interface to 

restore the factory defaults

 for the device, you 

must first delete the device and add it again using MeshManager so that the device 
type will be properly identified in the database. 

Web Interface Utility 

Initial configuration and management of MOTOMESH infrastructure devices can also carried out 
using the Web Interface utility.  The Web Interface application is designed to support the setup and 
configuration of smaller MOTOMESH networks. It can be used as an alternative to the MeshManager 
during the initial setup and configuration of MOTOMESH infrastructure devices. The application uses 
standard elements of a Web-based interface to allow the user to configure the basic parameters of 
seven primary network management elements required to successfully deploy a MOTOMESH network 
using the navigation menu displayed on each page. 

Detailed information about the Web Interface utility can be found in the 

Web Interface Users Guide

. 

Hardware Installation Notes 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
 

.  

 

.  

For a MOTOMESH deployment, a permanent power source for each MOTOMESH Duo 4300 device 
must be provided. All infrastructure devices require professional installation to ensure that the 
installation is performed in accordance with FCC licensing regulations 

Infrastructure devices are fitted with a single pivot mounting bracket

 

designed to be attached to light 

poles and other probable installation sites. Alternate mounting hardware is available for mounting 
directly to posts or structures that are too large for the standard bracket. Optional remote antenna 
mount hardware is also available for use with the alternate mounting hardware. 

Summary of Contents for MOTOMESH DUO 2.0 4300











































































Reviews:

No comments