Motorola ML900 HK1223 Owner'S Manual Download Page 103

Page: 103 / 151

6-2

Installing Software Drivers

How to Use the Driver CD

NOTES:

•

The drivers may have been updated after this manual was published. For driver

upgrade, please contact your dealer.

•

You can always find

README

or document files on the driver CD. These files

contain the latest information from the software supplier. Please read the files
together with this chapter.

•

This driver CD supports Windows 2000 and Windows XP only.

•

The available items may differ according to your computer model and operation

system.

An autorun program is provided on the driver CD to help you easily

install the drivers. As you insert the driver CD, the autorun program

automatically starts. If you need to start the program manually, run the

Autorun.exe

program from the Setup directory of the driver CD.

The main screen appears as shown next:

Summary of Contents for ML900 HK1223























































































































































Search results

Summary of Contents for ML900 HK1223

Reviews:

Brands by name

Popular brands

Motorola ML900 HK1223, Owner'S Manual

Search results

Summary of Contents for ML900 HK1223

Reviews:

Brands by name

Popular brands